DTF Printing Pressing Instructions

For Best Results with Cheetah Printz & Apparel Transfers

Follow these step-by-step instructions to ensure vibrant, long-lasting prints using your DTF (Direct-to-Film) transfers from Cheetah Printz & Apparel.

🧵 What You’ll Need

✅ Heat press machine (no irons)
✅ Teflon or parchment sheet (optional)
✅ Flat surface with no seams or wrinkles
✅ Clean, lint-free garment

🕘 Recommended Press Settings

Setting Value
Temperature 290°F – 320°F (140°C – 160°C)
Pressure Medium to Firm
Time 15 – 20 seconds
Peel Type Cold Peel ❄️

🔧 Adjust pressure depending on garment thickness. Too light = poor adhesion.

✋ Step-by-Step Instructions

1️⃣ Pre-Press Your Garment

  • Press the blank garment for 5–7 seconds to remove moisture and wrinkles.

  • This ensures better adhesion.

2️⃣ Place the DTF Transfer

  • Position the transfer film face up (design side up, ink side down).

  • Make sure it’s straight and centered.

3️⃣ Press the Transfer

  • Cover with Teflon sheet (optional, but helps protect your heat press).

  • Press at 310°F for 15 seconds with medium to firm pressure.

4️⃣ Let It Cool (Cold Peel)

  • Remove garment from heat press.

  • Wait 15–30 seconds until the film feels cool.

  • Gently peel the film in one smooth motion.

5️⃣ Final Press (Optional But Recommended)

  • Cover the design with parchment or Teflon sheet.

  • Press again for 5–10 seconds to seal the ink.

  • This increases wash durability and softens the feel.

🧼 Wash & Care Tips

✅ Wait 24 hours before first wash
✅ Wash inside out with cold water
✅ Tumble dry low or hang dry
✅ Do not bleach or iron over the design

With proper care, your DTF prints will last 50+ washes without fading or cracking!

❓Need Help?

Got questions or need pressing advice? Contact us at:
📧 info@cheetahprintz.com